DIY Variable jello remover filter

by PeepsDayz FPV | August 27, 2013 | (9) Posted in How To

Hey there Peeps, this is a small tutorial on how to make a variable light input filter to get rid of the jello produced by the rolling shutter on the GoPro Cameras.

The main advantage is that you can change the amount of light the sensor receives simply by adjusting the lense.

 

First what you are going to need is a RealD3D glasses you get on the cinema when watching a 3D movie.

 

 

Then, carefully, separate them from the lense, they are glued together, a bit of force is required, dont worry the lenses are plastic they wont break.

 

Once you have them apart, you will need to find the right position for them, only one will work, you will know you've done it right when it looks like the following video with no weird colors.

 

 

 

After this you'll need to cut them into your desired shape and size, it can be circular so you can adjust it on the go.

In my case, i've got the Spidex v2 gimbal, so its easy to swap them, i did 3 front lenses at diferent angles so i can adjust the light. 

 

 

 

Here is the finished set of lens.

 

 

Hope this works for you as well as it did for me, as always milage may vary, always balance your props and motors.

This is a vid showing the end result, thanks!!

 

COMMENTS

squishy on August 28, 2013
You could just use a better camera than the Gopro, like the sony or the contour..
Log In to reply
ghostrider03z on August 28, 2013
sony explodes the blues in everything.
Log In to reply
liveyourdreamsRC on August 28, 2013
Sorry, I think the GoPro beats both of them especially the 3 black edition even if it has jello at times.
Log In to reply
Cyberdactyl on September 6, 2013
I agree. The GP3Blk is miles above the Contour and/or the Sony.
Log In to reply
santiago404 on August 28, 2013
Contour? really?
Log In to reply
liveyourdreamsRC on August 28, 2013
Oh, just looked it up. I see the difference now. It's the wavy stuff in really vibration heavy videos.
Log In to reply
PeepsDayz FPV on August 28, 2013
yes even with full sun you wont get jello, some ppl also gets good results with ND filters but the advantage with this one is that you can adjust them to your needs.
Log In to reply
liveyourdreamsRC on August 28, 2013
Very cool!
Log In to reply
Klaus on August 28, 2013
Interesting, polarizers. So do you place one in front of the other, then rotate one with respect to the other to reduce the light input to the camera, effectively stopping it down and thereby reducing the shutter speed?
Log In to reply
PeepsDayz FPV on August 28, 2013
you got it exacly right!
Log In to reply
squishy on August 29, 2013
Every one of my HD videos was shot with the original Contour I bought for $100. They are now out of business due to Gopro's marketing, even though they had the better product. Tougher lighter and imo, shot better video. Not to mention it's profile is aerodynamic. The GoPro is only one HD camera guys, it's not the end all, be all of cameras, sorry. They just have strong marketing, look how well it worked fanboys...
Log In to reply
hoggdoc on November 14, 2013
Hmmm better than GoPro. IMO The audio from the Contour sucked and the profile would be almost impossible to mount on any existing gimbal. They failed as company because they didn't listen to their user base.

HD
Log In to reply
liveyourdreamsRC on August 28, 2013
So this allows you to get a better picture when you are in a really bright location? Could you to a video with and without the polarized lenses to show the difference?
Log In to reply
tsbanking on August 28, 2013
Great source of cheap polarizers, thanks!
Log In to reply
UndCon on August 28, 2013
That is exactly how polarized lenses for cameras work so no rocket science involved.

I bought a 52mm filter and mounted a servo to rotate 1 of the lenses - works great - but the servo needed more travel.
Log In to reply
stonekap on August 29, 2013
This is brilliant!
Log In to reply
bimdas on August 29, 2013
Nice work on finding a cheap way on making a variable nd filter. For those that don't know how it works it basically cuts the amount of light reaching the sensor therefore lowering the shutter speed of the gopro. Higher shutter speeds means less motion blur but more jittery and jelloy video.
Log In to reply
hoggdoc on November 14, 2013
I own a GoPro 3 Black and actually have never been impressed with the video I have gotten out of it. In fact it sits on the shelf while my Mobius is used as it is lighter, way less expensive and to my eyes shoots better video. Besides why risk a $400.00 camera in the air when the Mobius is as good as it is?

HD
Log In to reply

You need to log-in to comment on articles.


DIY Variable jello remover filter