Spitfire With Landing Gear - Free Plans

by LetsFlyRC | September 1, 2014 | (7) Posted in Projects

As Josh stated in the Mustang Video, "All Warbirds should have an option for gear."  (not exactly quoted)  

So, I give you the FT-Spitfire with Gear option.  This plane performs so well, and I had so much fun with the Mustang doing landings, and touch and go's, that I had to put them on the Spitfire.

FREE PLANS AT BOTTOM OF ARTICLE

 

 

Here is the flight video in New Smyrna Beach.

Here are some pics of my build.

 

And, of course, the plans.

Spitfire plans With Gear

COMMENTS

monterx7 on October 8, 2014
are you using a tail wheel?
Log In to reply
LetsFlyRC on October 12, 2014
no tail wheel, It just drags on the ground like the FT-mustang. But. it was interesting on the beach, because the rear of the spitfire fuse is open, so it collected the sand, and made it more tail heavy. It still flew fine, but I had to keep digging out the sand.
Log In to reply
wanabeRCexpert on December 5, 2016
have you ever crashed in the water?
Log In to reply
dkruger` on September 6, 2015
On your drawing, the support for the LG is shown on the wrong side of the spar.
Also can you tell me how long to cut the paint stick to fit? It needs about 1/8" space from the leading edge so the wing halves will maintain the correct airfoil.
Log In to reply
LetsFlyRC on September 7, 2015
I am very sorry, It has been a long time since I built this plane. All I did was copy the FT-Mustang. All the dimensions should be the same as that build.
Log In to reply

You need to log-in to comment on articles.


Spitfire With Landing Gear - Free Plans