Microaces

by FliteTest | January 1, 2013 | (27) Posted in Reviews

Microaces are 1/24th profile scale airplane replica kits uniquely designed specifically after aircrafts that were flown by actual pilots in history. 


All Microaces Standard Kits come with all the parts required to build the complete airframe. (Check out the Microaces website for a full list of what's included)



These warbird replica's consist of a lightweight Depron Aero airframe and highly detailed stickers that build up into a profile scale micro model.



The RC profile airplane kits include detailed printed stickers, carbon fiber and other components that strengthen the Depron airframe. The kits come with clear, step by step illustrated assembly manual as well as video tutorials available online. http://www.youtube.com/microacesTV



All you need to add is the Spektrum AR6400 or AR6400L receiver and your DSM2 compatible transmitter and you're up and flying!



David and Josh spent some time flying these warbirds at a local indoor event, putting these RC planes to the test!





Though the stickers help reinforce the airframe, we found that they tend to get loose and bind the servos. (The stickers could be trimmed with a razor to help prevent this.) We ended up pushing them back into place after each flight. 



Though it's not recommended, Josh was able to use the Vapor Li-Pocharger brick to charge the Microaces batteries.



Removing the landing gear seemed to help the flying characteristics and offered more speed. 



Josh and David had different experiences flying these micro profile planes. David found the micro warbirds to tend to tip-stall very easily, or as he would say "they are tip-stall'ee".



For the best experience, you'll want to be very easy on the controls while flying. When the airplanes are setup correctly, they fly very nicely!



The precision cut Depron Aero airframe, detailed hi-res stickers and a fully illustrated assembly manual offer a great kit building experience and unique overall flying experience! 



We'd like to thank Jon Porter and the team at Microaces for sending out some of these micro profile-scale kit warbird replica's for us to review!


Click the 'Join the Discussion' link below for more photos!


For more information on the productions mentioned in this episode:

P51 D Mustang & Focke Wulf 190 Profile Kit RC Airplanes
http://www.microaces.com/

Spektrum AR6400 or AR6400L Receiver - Horizon Hobby
http://www.horizonhobby.com/products/ar6410-dsmx-6-channel-ultra-micro-receiver-with-esc-SPMAR6410


1-Cell 3.7V 0.3A DC Li-Po Charger - (Vapor Charger)
http://www.horizonhobby.com/products/1-cell-3-7v-0-3a-dc-li-po-charger-EFLC1000

 

COMMENTS

casehatter on January 1, 2013
Hey Guys Done Good, and I'm with the Sweden I just don't like micro.
Haven fun love it.
Log In to reply
Hasersys on January 3, 2013
Wow nice knife edge for such a little thing. Wish I could fly that well.
Log In to reply
Zach Robinson on January 3, 2013
i had one before my friend totaled it i put homemade side force generators on the wings and it was much better
Log In to reply
liveyourdreamsRC on January 4, 2013
Also love the new intro!
Log In to reply
theKM on January 7, 2013
I am curious... if they were assembled with piece of 1/16th balsa under the rear trailing edge at the wingtip to hold in a little washout while applying the stickers would help the tip-stalling. alternatively, what could give a better result at a slight expense of building complexity... sand a slight leading edge into the leading edges at the wingtips only, apply the stickers on top, turn over, sand down the trailing edges at the wingtips (basically sanding in the washout), and then complete the stickers on the bottom. it could even be possible that lowering the top of the leading edge could be enough in itself, similar to making a boomerang airfoil. washout is a standard feature on tip-stall argumentative airplanes. I'd be happy to diagram a sanding guide as to what I mean if anyone wants details.
Log In to reply
ScrapDaddy14 on January 1, 2013
You guys are awesome! I enjoy your videos and your humor.
Log In to reply
ERAU1983 on January 2, 2013
David, I can't believe you challenged a guy that has two RC planes named for him. You should have challenged him to make the plane look scale in flight! I tend to agree with you. These micro planes may look good sitting on the table, but when you get them in the air, even in a low wind environment they still look like paper airplanes.

P.S. David, judging from that peach fuzz, if you had won we might be waiting for 2014 before see saw the results of your win. Sorry Josh.

Great video review guys!!!!!
Log In to reply
ERAU1983 on January 17, 2013
After watching the review again and looking at the quality of the decals, I was not fair with my comments on Microaces. The designer is true to the flight characteristics of the original planes, so if you have the skills, as Josh Bixler demonstrated, this can be a fun plane to challenge yourself with. The only legitimate complaint David may have had is the decal binding the controlls. This could easily be fixed with some foam-safe glue or by trimming the decal.

David, I still can't believe you challenged Josh to loop it.
Log In to reply
liveyourdreamsRC on January 2, 2013
Oh Dave! What did you get into!? I am with Dave on this too. Just really shaky in flight by the looks of it. It tip stalls all over the place! It still looks good and scale though. Thanks FT for another great episode. Also when is the 3d swappable (green plane in the background) coming out
Log In to reply
colorex on January 2, 2013
WTF? GoPro on a shaver???
Log In to reply
Tom_moore on March 16, 2014
you should make a micro profile swappable
Log In to reply

You need to log-in to comment on articles.


Microaces