DIY 40$ FPV receiver with Fatshark module

by val0production | July 7, 2014 | (0) Posted in How To

 

 

 

 

 

On the diagram, the module receiver is placed in this direction :

If you want change the frequency : (Dot not use the Pin 10, 11, 12 because it's the antenna connector)

 

 

 

 

UPDATE : I PUT NEW SWITCH FOR CHANGE THE FREQUENCY !!! 


 

Val. 

- Find this article & others like it at www.FliteTest.com -

COMMENTS

eagle4 on July 9, 2014
In your video you never explained where to put the switch. Also would you say there is a way to use a dip switch to be able to change the channels?
Log In to reply
val0production on July 9, 2014
Oh I am sorry I miss it, It's a power switch, placed between the battery and the module for turn off or turn on the system... I think i'ts maybe possible to use a switch for change the channels, I'll work on it...

Val.
Log In to reply
eagle4 on July 9, 2014
Just think, with 2 of these receivers, and the cheap DIY diversity controller from RCModelReviews you'll be able to build yourself a complete diversity receiver for about $85. Thats a steal, especially considering they retail for about $160+

How would you get RSSI out of this receiver? which pin would you use?
Log In to reply
val0production on July 9, 2014
I updated the article ;)

Comment if that's what you thought
Log In to reply
artemen on July 25, 2016
http://static.rcgroups.net/forums/attachments/5/9/2/0/a7429278-74-rssi.jpg
Log In to reply

You need to log-in to comment on articles.

val0modelisme

(67)

DIY 40$ FPV receiver with Fatshark module

Flite Fest Website Flite Fest Website
FliteTest Stem Website FliteTest Stem Website
FliteTest Groups Website FliteTest Groups Website