Pat G's New WASP!
A huge thank you to everyone that helped Pat find a name for this beast.
Congratulations to TRACKS for picking the winning name!
What you get with this model is big fun in a small package! This craft is a joy to fly. Fast ,light ,and very responsive. Took a hit to the ground,solid enough to kill an OSD, and not a scratch on her.
Bellissimo Patrizio!
" Simplicity, Durability and Affordability." With this in mind, Pat designed the frame to be as light and tough as possible. In order for it to be simple to assemble it has a minimal amount of plates and hardware.
Nicely engineered with a full carbon fiber lower deck and arms it is rigid and light. 323 mm at the widest and 725 grams AUW with a 2200mah 3s and FPV gear. Arms will fit a range of motors and will accommodate 6 inch props!
The design has a low parts count and goes together quickly.
Pat G's mini Hex frame.
Full Carbon lower plate and arms. Yellow G10 top deck
HIEE 1.5w TS3215 5.8G Video Tx
RunCam Sky camera 2.1mm wide lens
KVOSD
Fr Sky DR4 II 4ch telemetry receiver
RCX 1804 (2400KV) Micro Outrunners
RCX 10A ESC Brushless Motor Speed Controller (G Series / Programed for Multicopter - SimonK Firmware)
The RCX motors and 10 amp escs are fine but I am going to switch to Cobra 2204 2300kv motors and 12 amp escs or something close for more power
Minion frames and parts at these fine locations.
Canada
http://www.greathobbies.com/index.php
http://rotorgeeks.com/index.php?route=product/product&product_id=90
U.S.A
THE NEWEST, AND MOST POTENT, MINI HEX
Log In to reply
Log In to reply
Frank
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Reminded me of a bug on my visor :)
Nice design.
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
It shall be known as "The Floyd" in honor of your music.
Pats mini Floyd
Pats mini Spidex.
Pats mini Beatle.
Pats mini hex could have a nice home with me, I'll take good care of it, well sometimes.
Dave
Log In to reply
Log In to reply
Log In to reply
Log In to reply
I dub thee the "DarkSide 6"
Log In to reply
Log In to reply
Carbon Space Frame
(Matthew Sleep)
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
or
Boisea Trivittata Hex
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Very powerful and a little scary.
Log In to reply
Log In to reply
Wow guys those are a bunch of names I will start writing down all the cool names with the author and the forum so everyone can see what's going on :D
If this turns out fun like I think it will I will do this with a Minion frame but more details later ;)
Log In to reply
I love films How to train your dragon.
And i dream to have some day something to fly fpv.
Only thing i have is Nine Eagles 20 cm long mini helicopter.
Log In to reply
Thanks
Log In to reply
My wife saw this and she said after ten seconds video played - deer fly.
Here in Finland we have lots of those in forest where we pick up berries. And my wife hetes those deer fly a lot... :)
Lipoptena cervi is latin name for deer fly.
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Latin for "Flying Spider"
Log In to reply
https://www.youtube.com/watch?v=p1fwq3tP7cg
Log In to reply
Log In to reply
Log In to reply
The Devil6 or D6vil or Arnitoile6.
Phil
Log In to reply
Log In to reply
Log In to reply
My idea is "Shiva Mask"
Because of the indian goddess shiva which have multiple arms, and when i saw the frame for the first time i think of a hockey mask. This name give it a holy touch i like :)
(sorry if my english was not perfect)
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
"The Zat" has a pretty good ring to it ;)
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Keep posting there is still time, I will get a list going with the names that are making it hopefully this weekend.
Cheers guys.
Log In to reply
You know Hex --> Witch?
:)
Log In to reply
Or more generaly "Hexapus"
See here :
http://en.wikipedia.org/wiki/Henry_the_Hexapus
Log In to reply
Log In to reply
Log In to reply
Frank
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
http://static.comicvine.com/uploads/original/11114/111144625/3747668-scarlett+johansson+as+black+widow++(1).jpg
Log In to reply
Log In to reply
Log In to reply
Ok guys the final drawing it's almost done I just have to make it 3D check few things and then i will get the first batch once I have it here then time is on we and there will be one winner :D For now I can tell you I got her on a diet so she will be lighter ;) as soon as I get the 3D drawing I will post it here.
Keep the names comming guys.
Log In to reply
Log In to reply
Log In to reply
I think my voodoo is working ;)
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Couple more thoughts.
Merlin
Nimrod
Cyborg
Log In to reply
Log In to reply
Log In to reply
Log In to reply
Log In to reply
I really like the name Minion from the movies Despicable me and Mega Mind, I wonder how you came up with the name Minion? Here's another try.
Spyderbot.
I soo want to win this and I would be famous the world over like the Bixler, well sort of, hahaha.
Dave.
Log In to reply
Kevin
Log In to reply
Good luck guys
Log In to reply
Formidihex/Forminihex/ from the latin for the ant family - Formicidae
320 FPV Roach - looks like a cockroach
Bugout Mini-hex
Few stabs in the dark, cannot wait to try this frame
Log In to reply
Log In to reply
Just a thought!
Log In to reply
I will pick a name tonight and a winner will be announced tomorrow Zatoichi will be doing the honor here :) it's his thread after all.
Log In to reply