Texas Flying Wing Weekend

by FliteTest | July 11, 2016 | (5) Posted in Just Fun

 

At Flite Test, we’ve always been passionate about hobbies and activities that bring families together. Shane and Heather McDowell, a wonderful flying family from our community, share that passion and have traveled the country competing in wing racing.

Wing racing has a lot of similarities to drone racing, but the speeds are higher and the courses are bigger. Each pilot creates their own unique look for their wing that represents their own creativity, their team or their sponsor. Visually it is amazing and beautiful for both the spectators and the pilots.

Josh and Jen recently spent a weekend with the McDowells, who were building a wing for fellow Flite Test community members Paul and Thomas Bitmatta of BMSWeb.

The McDowells shared their technique for launching their planes with us. The wings are so powerful, that it is hard to get a stable launch when throwing from the wing tip. Launching over the head allows pilots to recover easier under the goggles when racing.

Heather and Shane are sponsored by TeamLegit, and gave Josh a chance to fly one of their wings. Josh, Jen and the McDowells also flew with a few local flying clubs as well, the Dallas FPV Wing Club and the DFW RC Flyers. They also gave us some invaluable input on one of our new designs, the Twin Baron.

During the weekend, Jen got to fly FPV for the first time. She flew one of Shane’s training ships using head plate goggles so she could fly with her glasses on.

Thanks to Shane and Heather for sharing their knowledge and passion for flight with us!

Learn more about the Dallas FPV Wing Club HERE!

Learn more about the DFW RC Flyers HERE!

COMMENTS

stephenkrall on July 12, 2016
Great Video! I am hating the fact that I won't be able to make it to flitefest this year. You guys are the best!
Log In to reply
Air-headed Aviator on July 11, 2016
Flite Test was in Texas and no one told me? Oh well, its cool to know there are some cool flying clubs in town though. I gotta get out there and start flying with others.
Log In to reply
flashgangster on July 11, 2016
If you're in the North Texas area, go to our site dfwc.club or look us up on Facebook. We fly all over DFW and the surrounding areas every weekend and a lot of week nights during the summer.
Log In to reply
LocalHero on August 31, 2016
Derek and Jesse are the two guys that really invited me into the hobby. They are the coolest people to fly with in DFW, extremely friendly, and helpful. Wish I could have been there to meet some of the FT crew and get my planes up in the air!
Log In to reply
larsmn on July 12, 2016
How do they get their video feed to be so stable? My wing camera is all shaky, particular if a bit of wind. According to some guys, wings are more prone to such, not having ailerons to adjust with, only elevons. Are they using some gimbal or similar anti-shake solution and if so, what?
Log In to reply
flashgangster on July 13, 2016
We don't use any sort of gimbal or stabilization (or flight controllers). It's generally pretty windy here in North Texas, so we do a couple of things to combat the wind when it becomes an issue.

1. Run a little nose heavy. A little bit of nose weight will help to smooth out your video in higher winds. Keep in mind the changes that will occur with your plane though (slower stall speed, elevator feel, and increased landing speed)

2. Heather and I don't own a plane that weighs less than about 2.25 lbs. I know weight Nazis cringe at such things, but a heavier plane will fly better in the wind.

Sometimes it's just too windy (here, we just turn the HD cams off above 20mph winds). Sometimes the air is just too bumpy too. There's not a whole lot you can do about bumpy air. When you fly low, you'll tend to find some bumps with changes in air humidity, etc., such as transitions from grass to concrete, air over bodies of water (even large puddles) and things like that.

Also, it seems that flat-bottomed airfoils tend to not like the wind so much. All of the Team Legit wings are NOT flat-bottomed, so they seem to handle the wind better than our wings that ARE flat-bottomed airfoils. Hope this helps!
Log In to reply
guytranspo on July 15, 2016
Thanks for the info, Shane.
I'm wondering what size batteries you guys run in your 32" wings.
Thanks again.
Log In to reply
flashgangster on July 18, 2016
We run a 4s 2600mah and 4s 2650mah in our 32" wings. We run 3300mah 4s in most all of our other wings.

Yes, we use the Dremel bit to cut the entire bay. Basically going back and fourth, sort of like a human CNC :) If you make your passes too big, you'll get chunks of EPP wrapping around the bit and the floor of your bay won't look so great.
Log In to reply
guytranspo on July 18, 2016
Great!
Thanks for the reply. I really appreciate your help.
Log In to reply
guytranspo on July 15, 2016
I'm also wondering how you keep the bottom of your bays so clean.
Do you use the small Dremel bit to cut the whole bay?
Log In to reply

You need to log-in to comment on articles.


Texas Flying Wing Weekend